From the airport to your first stay in Japan

Your flight itinerary tells you when you land. Your accommodation needs to know when you’ll reach its door. Between those two times you may have immigration, bags to collect, and a train or bus to catch. Plan the whole trip before you fly, especially if you land late.

Before you fly: save two routes

  1. Check the airport code and arrival terminal. If you’re flying into Tokyo, Haneda (HND) and Narita (NRT) are different airports. Start your route from the one on your ticket and check your terminal again on travel day.
  2. Check the last trip all the way to your stay. Look up the train or bus for your date. Check the last connection too: a train leaving the airport won’t help if the next train has already stopped. Leave time to collect bags and walk to the stop.
  3. Pick a backup you can actually use. Check whether a taxi is in your budget, where it picks up, and whether it can take your luggage. If a room near the airport is your backup, check whether it actually accepts arrivals at your expected time. After midnight, a room listed for that date may not open for check-in until the afternoon.

Save screenshots of both routes, your stay’s Japanese address and phone number, and the instructions for getting in. Keep them on your phone so you don’t have to find Wi-Fi just to open them.

Landing at Haneda with several bags? The same-day hotel delivery service in our guide stops accepting bags at 4 p.m. at Terminal 3. If you won’t reach the counter in time, plan a route that works with your luggage. Check whether to send your bags or carry them.

After you land: check the time before you leave the terminal

  • Your route still works: Follow your saved route, but check for disruptions and give yourself time for the transfer.
  • You’ll miss the last connection: Check GO or Uber pickup below. If you can’t get a ride in the app, ask the information desk about a late bus or the official taxi stand for your terminal.
  • You’ll miss the check-in cutoff: Message your accommodation before you pay for a ride. If you can’t confirm that you’ll get in, check a reachable backup or ask airport staff where you can wait. Terminal areas and opening hours can differ.

You can show this to airport staff. Pull up the Japanese address on your phone first.

この住所に行きたいのですが、今から電車かバスで行けますか? 難しければ、タクシー乗り場を教えていただけますか?

“I’d like to go to this address. Can I still get there by train or bus? If not, could you show me where to get a taxi?”

If your card won’t work at the airport

Stay on airport Wi-Fi while you check. Use the airport’s ATM map to find a machine in your terminal’s public arrivals area that shows your card’s network logo. If it says the amount is too high, try a smaller amount. If it says the PIN is wrong, don’t keep guessing: check with your card issuer. A matching logo doesn’t guarantee your card will work. If it is declined, check your issuer’s app or support for overseas cash withdrawals, or use a different card. If you already have foreign cash, check whether an open exchange counter accepts it.

Haneda ATM map · Narita ATM map

Call a taxi with GO or Uber

Once you’ve collected your bags, open the app on airport Wi-Fi, enter your accommodation’s address, and check the pickup point, estimated cost and car size before requesting.

The regular taxi queue isn’t the app pickup point. If the app won’t accept your location at the taxi stand, check the pickup point it offers for your terminal. Follow the airport signs to that spot. If the app shows no pickup point, or you can’t get to the one it shows, use the regular taxi queue or ask the information desk.

At Haneda Terminal 3, for example: the regular taxi queue is at stand 21 on 1F. GO identifies P5 Parking, 8F, as an app pickup point (Japanese). Uber lists P5 Parking, 8F, and Haneda Airport Garden Parking A. Go to the point your app shows, especially if one is closed or busy.

Uber: If you already use Uber, start there. Follow Uber’s pickup instructions for Haneda or Narita. If you have several suitcases, check the car size before you request.

GO: Set up the GO app with a phone number that can receive an SMS code. Some overseas numbers can’t register until you’re in Japan, and GO requires location access to request a ride with a non-Japanese number. Check what’s offered for your exact terminal in the app. GO doesn’t offer its airport flat fare in the app for rides starting at Narita; you can ask about the airport’s separate fixed fare at the taxi stand.

If the app can’t find a ride: use the airport taxi stand

At Haneda (HND), follow the taxi signs to the first-floor (1F) stands at your terminal. At Terminal 3, the regular taxi stand is No. 21. If you reserved a car or booked through an app, check the pickup instructions: that may be a different place. Haneda’s official taxi stand maps.

At Narita (NRT), go to stand No. 15 at Terminal 1 or use the official map for Terminal 2 or 3. If you’re heading into Tokyo, ask if a fixed fare is available for your address. As a guide, Narita lists ¥31,500–¥32,500 to Shinjuku, depending on the expressway route, before tolls and any applicable late-night surcharge. That’s an example, not a quote. Narita’s official taxi stands and fares.

Before you get in, show the driver the Japanese address. Ask for the estimated total, including tolls and any late-night charge, and check that your bags will fit and that you can use your preferred payment method.

この住所まで、高速料金や深夜料金も含めて、だいたいいくらですか? この荷物は全部載せられますか?

“About how much to this address, including tolls and any late-night charges? Will all these bags fit?”

Airport information checked November 20, 2026.

Start with your airport’s official guide

Your next step: Open your flight booking, then save one route and one backup from your actual arrival terminal to your stay.

Back to Step 2: Arrival day

タイトルとURLをコピーしました